K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
6. Remove the stoplamp switch.
7. Remove the pushrod from the brake pedal pin.
8. Remove the booster nuts.
9. Remove the booster assembly.
10. Remove the gasket.
INSTALLATION PROCEDURE
1. Install the gasket.
2. Install the booster assembly.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the booster nuts.
^
Tighten the nuts to 36 Nm (26 ft. lbs.).
