S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
5. Install the boot into the caliper housing bore using J 26267.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the bleeder valve in the caliper body.
-
Tighten the bleeder valve to 12 Nm (110 inch lbs.).
Front (Dual Piston)
Brake Caliper Overhaul - Front (Dual Piston)
-
Tools Required
-
J 8092 Driver Handle
-
J 43885 Boot Seal Installer
Disassembly Procedure