S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Brake Hose/Line: Service and Repair
Front (Dual Piston Caliper)
Brake Hose Replacement - Front (Dual Piston Caliper)
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the front tire and wheel assembly.
3. Clean the hose fittings at both ends. Remove all dirt, grease, and other foreign material.
4. Place a container under the hose to catch any dripping brake fluid.
5. Disconnect the brake pipe fitting at the frame.
6. Remove the brake pipe retainer.
7. Remove the front flex hose support bracket nut and bolt.
8. Remove the front brake hose bolt and gaskets from the caliper.
9. Remove the front brake hose.
Installation Procedure
