S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.
4. Support the axle so that there is a distance of 170 mm + 6 mm (6.7 in + 0.24 in) between the axle tube and the metal surface of the bumper
bracket (1).
^
Tighten the rear shackle nuts to 122 Nm (89 ft. lbs.).
