Safari Van 2WD V6-4.3L VIN X (2003)
3. Remove the seat back hinge bolts from the right and left sides of the cushion frame.
4. Remove the seat cushion frame.
INSTALLATION PROCEDURE
1. Install the seat cushion frame.
2. Install the seat back hinge bolts to the right and left sides of the seat cushion frame.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the seat back hinge bolts to the right and left sides of the seat cushion frame 30 N.m (22 lb ft).
3. Install the seat cushion cover and pad.
4. Install the rear bench seat to the vehicle.
