Safari Van 2WD V6-4.3L VIN X (2003)
2. Install the seat back hinge bolts to the left side of the seat frame.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the seat back hinge bolts to the left side of the seat frame to 30 N.m (22 lb ft).
3. Install the bolts to the right side of the seat frame.
Tighten
Tighten the seat back hinge bolts to the right side of the seat frame to 30 N.m (22 lb ft).
4. Install the lumbar support cable.
5. Install the seat cushion cover and pad.
6. Install the bucket seat in the vehicle.
