Safari Van AWD V6-4.3L VIN W (1996)
Apply sealant GM P/N 12346141 or equivalent to the front cover to block joint and to the rear crankshaft seal to block joint. Apply the sealant for 25
mm (1 inch) in both directions from each of the four corners.
1. Oil pan gasket to the oil pan.
2. Oil pan to the engine.
3. Oil pan bolts and studs in sequence.
4. Rubber bell housing plugs.
Important
-
Anytime the transmission and the oil pan are off the engine at the same time, the transmission must be installed before the oil pan. This will allow
for the proper measurement of the oil pan tolerance.
Measure
