Safari Van AWD V6-4.3L VIN W (1996)
-
Use a feeler gage to check the clearance between the three oil pan-to-transmission contact points. If the clearance exceeds 0.254 mm (0.010 inch)
at any of the three points repeat the installation steps until the clearance is within specification.
Tighten
-
Oil pan bolts and studs to 25 N.m (18 lb. ft.).
5. Transmission oil cooler lines.
6. Starter shield.
7. Starter.
8. Oil filter adapter.
9. Oil cooler lines.
10. Oil filter.
11. Front drive axle tube nuts.
12. Lower drive axle bushing bolt left.
-
Lower the vehicle.
13. Proper quantity and grade of engine oil.
14. Negative battery cable.