Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Notice: Refer to Fastener Notice in Service Precautions.
Important: All flywheel to converter bolts should be hand started before tightening in order to ensure proper alignment, and in order to avoid
cross-threading.
1. Install the flywheel to converter bolts. Hand start the bolts.
^
Tighten the bolts to 63 Nm (46 ft. lbs.).
2. For vehicles equipped with a 4.3L engine, install the bolts securing the starter cover to the transmission.
^
Tighten the bolts to 20 Nm (15 ft. lbs.).
3. For all engines except the 4.3L engine, install the access cover located at the bottom of the transmission bell housing.
4. Lower the vehicle.
