Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
1. Lubricate the inner tie rod threads with a suitable chassis lubricant before installing the outer tie rod.
2. Install the inner tie rod to the vehicle.
3. Install the inner tie rod to relay rod retaining nut.
Notice: Refer to Fastener Notice .
4. Tighten the inner tie rod to relay rod retaining nut using J 34028 .
Tighten the nut to 112 N.m (83 lb ft).
5. Install the outer tie rod.
6. Install the tire and wheel.
7. Lower the vehicle.
8. Adjust the front toe. Refer to Measuring Wheel Alignment .
