Savana 3/4 Ton Van V6-4.3L VIN X (2003)
10.3.
Tighten the bolts on the final pass in sequence (1-8) to 15 Nm (11 ft. lbs.).
11. Position the power steering pump mounting bracket.
12. Install the power steering pump mounting bracket, 3 bolts and the nut.
^
Tighten the power steering pump mounting bracket bolts and the nut to 41 Nm (30 ft. lbs.).
^
Tighten the power steering pump rear bracket nut to 41 Nm (30 ft. lbs.).
^
Tighten the power steering pump mounting bracket bolts and the nut and the power steering pump rear bracket nut to 41 Nm (30 ft. lbs.).
13. Install the drive belt.
14. Install the A/C compressor discharge hose from the vehicle.
15. Install the A/C compressor suction hose from the vehicle.
Important: In order to install the distributor for the correct engine timing, position the engine to number one cylinder top dead center (TDC).
16. Remove the spark plug for number one cylinder.
17. Rotate the crankshaft until number one cylinder is in the compression stroke.
18. Align the 2 reference marks on the crankshaft balancer (1) and (4) with the 2 alignment marks (2) and (3) on the front cover.
19. Install the spark plug.
20. Install the distributor.
