Savana 3/4 Ton Van V6-4.3L VIN X (2003)
7. Install a NEW upper intake manifold to lower intake manifold gasket in the groove of the upper intake manifold.
8. Install the upper intake manifold onto the lower intake manifold.
9. If reusing the fasteners, apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the threads of the upper intake manifold
attaching bolts.
Notice: Refer to Fastener Notice in Service Precautions.
10. Install the upper intake manifold attaching studs.
10.1.
Tighten the upper intake manifold attaching studs on the first pass to 5 Nm (44 inch lbs.).
10.2.
Tighten the upper intake manifold attaching studs on the final pass to 9 Nm (80 inch lbs.).
11. Install the fuel lines to the fuel meter body assembly.
12. Install the distributor cap.
13. Install the ignition control module.
14. Install the EVAP canister purge solenoid valve.
