Savana 3/4 Ton Van V6-4.3L VIN X (2003)
14. Remove the power steering pump rear bracket mounting nuts.
15. Remove the power steering pump rear bracket.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the rear bracket to the power steering pump.
2. Install the power steering pump rear bracket mounting nuts.
Tighten the nuts to 50 Nm (37 ft. lbs.).
3. Install the power steering pump to the vehicle.
4. Install the power steering pump front mounting bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Reposition the accessory mounting bracket and install the mounting bolts and nut.
