Savana 3500 V8-4.8L (2009)
6. Using a blunt wooden or plastic tool, remove the brake caliper piston dust seals (1).
7. Using a blunt wooden or plastic tool, remove the brake caliper piston seals (1).
8. Inspect the brake caliper bores for corrosion, grooves, and scoring.
*
Inspect the caliper piston bores
*
Inspect the caliper piston seal grooves
If excessive corrosion, grooving, or scoring is found, replace the brake caliper.
9. Clean the brake caliper housing and any parts to be reused with denatured alcohol.
10. Dry all components with dry, filtered, non-lubricated compressed air.
Assembly Procedure
1. Apply a light coating of GM approved brake fluid from a clean, sealed brake fluid container to the brake caliper components:
*
Brake caliper piston bores
*
Brake caliper pistons
*
Brake caliper piston seals
