Savana 3500 V8-4.8L (2009)
Brake Rotor/Disc: Specifications
Front Brake JH5
Rotor Discard Thickness*........................................................................................................................................................................27.50 mm (1.083 in)
Rotor Minimum Allowable Thickness After Refinish...................................................................................................................................28.0 mm 1.102 in
Rotor Maximum Allowable Lateral Runout...............................................................................................................................................0.13 mm (0.005 in)
Rotor Maximum Allowable Thickness Variation.....................................................................................................................................0.025 mm (0.001 in)
Front Brake JH6
Rotor Discard Thickness*........................................................................................................................................................................36.50 mm (1.437 in)
Rotor Minimum Allowable Thickness After Refinish...................................................................................................................................37.0 mm 1.457 in
Rotor Maximum Allowable Lateral Runout...............................................................................................................................................0.13 mm (0.005 in)
Rotor Maximum Allowable Thickness Variation.....................................................................................................................................0.025 mm (0.001 in)
Front Brake JH7
Rotor Discard Thickness*........................................................................................................................................................................36.50 mm (1.437 in)
Rotor Minimum Allowable Thickness After Refinish...................................................................................................................................37.0 mm 1.457 in
Rotor Maximum Allowable Lateral Runout...............................................................................................................................................0.13 mm (0.005 in)
Rotor Maximum Allowable Thickness Variation.....................................................................................................................................0.025 mm (0.001 in)
Rear Brake JH5
Rotor Discard Thickness*........................................................................................................................................................................28.50 mm (1.122 in)
Rotor Minimum Allowable Thickness After Refinish...................................................................................................................................29.0 mm 1.142 in
Rotor Maximum Allowable Lateral Runout...............................................................................................................................................0.13 mm (0.005 in)
Rotor Maximum Allowable thickness Variation......................................................................................................................................0.025 mm (0.001 in)
Rear Brake JH6
Rotor Discard Thickness*........................................................................................................................................................................27.50 mm (1.083 in)
Rotor Minimum Allowable Thickness After Refinish...................................................................................................................................28.0 mm 1.102 in
Rotor Maximum Allowable Lateral Runout...............................................................................................................................................0.13 mm (0.005 in)
Rotor Maximum Allowable thickness Variation......................................................................................................................................0.025 mm (0.001 in)
Rear Brake JH7
Rotor Discard Thickness*........................................................................................................................................................................28.50 mm (1.122 in)
Rotor Minimum Allowable Thickness After Refinish...................................................................................................................................29.0 mm 1.142 in
Rotor Maximum Allowable Lateral Runout...............................................................................................................................................0.13 mm (0.005 in)
Rotor Maximum Allowable thickness Variation......................................................................................................................................0.025 mm (0.001 in)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace
any rotor that does not meet the minimum thickness specifications.