gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Parking Brake Cable > < Parking Brake Actuator|Service and Repair
Page 2
background image

3. Install the backing plate bolts.

*

Tighten the single rear wheel bolts to 135 Nm (100 lb ft).

*

Tighten the dual rear wheel bolts to 160 Nm plus 30 degrees (118 lb ft plus 30 degrees).

4. Install the park brake shoe. Refer to Parking Brake Shoe Replacement (Single Rear Wheel - 1500 series)   (See: Parking Brake Shoe/Service and

Repair)Parking Brake Shoe Replacement (Single Rear Wheel - 2500/3500 Series)   (See: Parking Brake Shoe/Service and Repair).

5. Install the axle shaft. Refer to Rear Axle Shaft Replacement (8.6, 9.5 Inch Axles W/O RPO JL4)   (See: Transmission and Drivetrain/Drive Axles,

Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and Repair)Rear Axle Shaft Replacement (8.6 Inch Axle W/RPO JL4)   (See:
Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and Repair)Rear Axle Shaft Replacement
(9.5, 9.75Inch Axles )   (See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and Repair).

6. Adjust the park brake shoe. Refer to Parking Brake Adjustment   (See: Adjustments).
7. Install the rotor. Refer to Rear Brake Rotor Replacement (With Single Rear Wheel)   (See: Disc Brake System/Brake Rotor/Disc/Service and

Repair/Removal and Replacement/Rear Brake Rotor Replacement (With Single Rear Wheel))Rear Brake Rotor Replacement (With Dual Rear
Wheel)   (See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement (With Dual
Rear Wheel)).

8. Install the park brake cable to the mounting bracket until the locking tabs snap into place.
9. Install the rear park brake cable to the park brake actuator lever.

10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation   (See: Maintenance/Wheels and Tires/Service and Repair).
11. Remove the safety stands.
12. Lower vehicle. 
13. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling   (See: Parking Brake Cable/Service and

Repair/Procedures/Parking Brake Cable Adjuster Enabling).

14. Adjust the park brake. Refer to Parking Brake Adjustment   (See: Adjustments).

Parking Brake Cable > < Parking Brake Actuator|Service and Repair