Savana 3500 V8-4.8L (2009)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator Tube Replacement
Oil Level Indicator Tube Replacement
Removal Procedure
1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair).
2. Remove the retaining bolt for the coolant recovery reservoir and set the reservoir aside.
3. Remove the oil level indicator (418).
4. Remove the oil level indicator tube bolt (419).
5. Remove the oil level indicator tube (420) from the engine block.
Note: The O-ring may be reused if not cut or damaged.
6. Inspect the O-ring seal for cuts or damage.
7. Remove the O-ring seal (421) from the tube, if required.
Installation Procedure
