Savana 3500 V8-4.8L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the rear axle fill plug and tighten to 33 Nm (24 lb ft)..
4. Remove the support and lower the vehicle.
Rear Drive Axle
Rear Axle Lubricant Replacement (9.75, 10.5 and 10.75 Inch Axles)
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
2. Remove the fill plug.
3. Remove the rear axle housing cover bolts.
Discard the bolts.
4. Remove the rear axle housing cover.
Drain the lubricant into a suitable container.
5. Remove the sealant from the rear axle housing and the rear axle housing cover.
Installation Procedure