Savana 3500 V8-4.8L (2009)
Auxiliary Air Conditioning Evaporator Tube with Auxiliary Heater Inlet and Outlet Pipe
Replacement
Auxiliary Air Conditioning Evaporator Tube with Auxiliary Heater Inlet and Outlet Pipe Replacement
Special Tools
J 38185 Hose Clamp Pliers
Removal Procedure
1. Remove the engine cooling fan. Refer to Fan Replacement (See: Engine, Cooling and Exhaust/Cooling System/Radiator Cooling Fan/Service and
Repair).
2. Remove the accumulator. Refer to Air Conditioning Accumulator Replacement (See: Heating and Air Conditioning/Accumulator HVAC/Service
and Repair)
3. Remove the passenger side wheel house splash shield. Refer to Wheelhouse Splash Shield Replacement (See: Body and Frame/Fender/Rear
Fender/Rear Fender Liner/Service and Repair)
4. Loosen but DO NOT remove driver side body mount bolts.
5. Remove passenger side body mount bolts.
6. Slowly lift the passenger side of the body off the frame, and support.