Replacing Crankshaft Position Sensor on Savana 3500 V8-48L (2009)
5. Clean the area around the CKP sensor before removal in order to avoid debris from entering the engine.
6. Remove the CKP sensor retaining fastener.
7. Remove the CKP sensor.
Installation Procedure
1. Install the CKP sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the CKP sensor retaining fastener and tighten to 25 Nm (18 lb ft).