gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Side Marker Lamp Replacement (RPO T90)|Page 19798 > < Diagram Information and Instructions|Page 19795
Page 1
background image

Marker Lamp: Service and Repair
Front Side Marker Lamp Replacement (RPO T90)

FRONT SIDE MARKER LAMP REPLACEMENT (RPO T90)

REMOVAL PROCEDURE

1. Remove the screw (4) that retains the front side marker lamp to the radiator grille.
2. Lift the side marker lamp (3) up and out in order to disengage the tab.
3. Disconnect the bulb socket (1) from the side marker lamp.
4. Remove the bulb (1) from the socket.

INSTALLATION PROCEDURE

1. Connect the bulb (1) into the socket.
2. Connect the bulb socket (1) into the side marker lamp.
3. Install the side marker lamp (3) to the radiator grille (5).

4. NOTE:  Refer to Fastener Notice.

Install the side marker lamp retaining screw (4).

Tighten the screws to 1.5 N.m (13 lb in).

Front Side Marker Lamp Replacement (RPO T90)|Page 19798 > < Diagram Information and Instructions|Page 19795