Savana 4500 V8-6.6L DSL Turbo (2009)
5. Remove the glow plug control module bolts (1).
6. Remove the glow plug control module (2).
7. Remove the glow plug control module bracket bolts (3), if required.
8. Remove the glow plug control module bracket (4), if required.
Installation Procedure
1. Position the glow plug control module bracket (4), if required.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the glow plug control module bracket bolts (3), if required. Tighten the bolts to 10 Nm (89 lb in).
3. Position the glow plug control module (2).
4. Install the glow plug control module bolts (1) and tighten to 10 Nm (89 lb in).
