Sierra 1500 2WD V8-6.0L Hybrid (2010)
6. Remove the 3 phase cable retainer nut (2).
7. Remove the 3 phase cable retainer (1) from the bracket.
8. Remove and lower the transmission enough to gain access to the 3 phase cable bracket bolts (1). Refer to Transmission Replacement ().
9. Remove the 3 phase cable bracket bolts (1).
10. Remove the 3 phase cover bolts (9) and transmission cover terminal housing (8).
11. Remove the 3 phase cover (7).
12. Disconnect the 3 phase cable cover connector.
13. Remove the 3 phase cable bolt protective cover (5).
14. Remove the 3 phase cable retaining bolts (4).
15. Remove the 3 phase cables and housing (3).
16. Finish removal of the transmission while allowing the 3 phase cables to remain in the vehicle. Refer to Transmission Replacement ().
17. Remove the 3 phase cables from the vehicle.
Installation Procedure
Caution: To avoid high voltage 3-phase cable or vehicle damage properly attach the cables and brackets, and check for and correct any interference.
