Sierra 1500 2WD V8-6.0L Hybrid (2010)
Note: When performing the following service procedure, move the drift back and forth between one side of the cup and the other in order to work
the cups out of the retainer evenly.
8. Using a hammer and a brass drift in the slots provided, remove the outer pinion bearing cup.
Note: When performing the following service procedure, move the drift back and forth between one side of the cup and the other in order to work
the cups out of the retainer evenly.
9. Using a hammer and a brass drift in the slots provided, remove the inner pinion bearing cup.
Installation Procedure
1. Using the J 37624 (2) and the J 8092 (1), Install the inner pinion bearing cup into the pinion gear bearing retainer.
