Sierra 2500 Denali 2WD V8-6.0L (2011)
Note: Ensure that the upper ball joint is not being rubbed on by the ratchet during the removal or installation of the lower ball joint. Rubbing on
the upper ball joint seal will cause premature failure of the upper ball joint.
5. Position the CH-41805 - kit (1) on the lower control arm.
6. Using the CH-41805 - kit (1) and a shallow socket, remove the lower ball joint (2) from the control arm.
Installation Procedure
1. Position the ball joint (1) in the lower control arm.