Sierra Denali RWD V8-6.2L (2009)
7. Remove the flywheel housing bolts, denoted by the black circles.
8. Separate the flywheel from the cylinder block usingJ 37228 .
9. Remove the flywheel housing.
10. Remove the turbocharger oil return pipe gasket from the flywheel housing.
11. Remove the oil cooler adapter bolts.
12. Remove the oil cooler adapter and gaskets.
13. If required, clean and inspect the flywheel housing. Refer to Engine Flywheel Housing Cleaning and Inspection () .
Installation Procedure
