Yukon/Denali 2WD V8-4.8L VIN V (2005)
6. Install the 2 front seats.
Rear Pillar (Utility)
SPEAKER REPLACEMENT - REAR PILLAR (UTILITY)
REMOVAL PROCEDURE
1. Remove the garnish molding.
2. Remove the garnish molding.
3. Remove the speaker.
4. Disconnect the electrical connectors, as necessary.
INSTALLATION PROCEDURE
1. Connect the electrical connectors, as necessary.
2. Install the speaker.
3. Install the garnish molding.
4. Install the garnish molding.
5. Verify the component's operation.
Rear Door
SPEAKER REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE