Yukon XL 2500 2WD V8-6.0L VIN N (2006)
9. If equipped with 4-wheel drive (4WD), remove the fuel hose/pipe clip from the bracket on the transfer case.
10. Remove the front fuel tank.
11. Remove the fuel line bracket nuts.
12. Remove the fuel/EVAP line bundle.
INSTALLATION PROCEDURE
1. Install the fuel/EVAP line bundle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fuel line bracket nuts.
Tighten the bolt to 12 N.m (106 lb in).
3. Install the front fuel tank.
