Yukon XL 2500 4WD V8-6.0L VIN N (2006)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - CANISTER/FUEL TANK
REMOVAL PROCEDURE
IMPORTANT: Clean all evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting, in order to avoid possible
EVAP system contamination.
1. Remove the rear fuel tank.
2. Disconnect the EVAP lines from the module.
3. Cap the EVAP openings in order to prevent possible EVAP system contamination.
4. Remove the EVAP lines (1) from the retaining clips.
INSTALLATION PROCEDURE