Accord L4-2.2L SOHC VTEC (1994)
12. Align the cancel sleeve grooves with the cable reel projections.
13. Carefully install the cable reel on the steering column shaft. Then attach the connector holder to the steering column.
14. Install the steering column upper and lower covers.
15. Center the cable reel. Do this by first rotating the cable reel clockwise until it stops. Then rotate it counterclockwise (approximately two turns)
until:
-
The yellow gear tooth lines up with the alignment mark on the cover.
-
The arrow mark on the cable reel label points straight up.
