Accord L4-2.2L SOHC VTEC (1994)
[NEW] 7.
With the glass raised fully, loosen the two front run channel mounting bolts. Move (without forcing) the run channel rearward to increase its
overlap with the glass. Tighten the mounting bolts to 8 Nm (0.8 kg-m, 6 lb-ft).
[NEW] 8.
Raise and lower the window several times to check for binding or slow operation. If necessary, readjust the front run channel.
9.
Reinstall the door trim panel and all related parts.
PARTS INFORMATION [NEW]
Window glass mounting bolt (2 required):
P/N 90112-SV2-000, H/C 4919973
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your
Zone Office. You must request consideration, and get a decision, before starting work.
SIDE
OPERATION NUMBERTEMPLATE ID
LEFT
826013
94-024A
RIGHT
827013
94-024B
Flat rate time:
0.5 hour per side
Failed part:
P/N 72250-SV2-003 H/C 4304226
Defect code:
042
Contention code:
B07