Accord V6-3.0L (2003)
9. If necessary, detach the hooks (A) and the clip (B), then remove the front roof side pad (C) and rear roof side pad (D).
10. 4-door with moonroof: If necessary, pull down the roof console bracket (A) to release the clip.
11. Install the headliner in the reverse order of removal, and note these items:
-
When reinstalling the headliner through the door opening, be careful not to fold or bend it. Also, be careful not to scratch the body.
-
If the threads on a visor and grab handle (4-door) screws are worn out, use an oversized self-tapping ET screw made specifically for this
application:
Visor: P/N 90137-S30-0030
Grab handle: P/N 90137-S0A-0030
-
Check that both sides of the headliner are securely attached to the trim.
