Accord V6-3.0L Hybrid (2005)
Body Emblem: Service and Repair
Emblem/Sticker Replacement
'05 Model
NOTE: When removing the emblems/sticker, take care not to scratch the body.
1. Clean the body surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
2. Apply the emblems/sticker where shown. When installing the ULEV sticker on the inside surface of the rear door quarter glass, align rear edge of
the application tape and bottom of the sticker with the glass mark, then press the sticker into place, and remove the application tape.
'06-07 Models
NOTE: When removing the emblems/sticker, take care not to scratch the body
1. Clean the body surface with a sponge dampened in alcohol After cleaning, keep oil, grease, and water from getting on the surface
