Accord V6-3.0L Hybrid (2005)
The normal warranty applies.
Failed Part:
P/N 91570-SDC-A01
(2003-07 Accord)
P/N 91570-TA0-003
(2008-11 Accord)
P/N 91570-SHJ-A01 (Odyssey)
P/N 91 70-SZA-A01 (Pilot)
Defect Code:
02502
Symptom Code:
06201
Skill Level:
Repair Technician
REPAIR PROCEDURE
1. Remove the damaged retainers or adhesive from the body:
^
Avoid damaging plastic parts by removing them or covering them with aluminum foil.
^
Using a heat gun, heat the retainer or leftover adhesive to between 212°F-248°F (100°C-120°C).
^
Avoid damaging the paint by applying heat gradually to the retainer.
^
Use a plastic scraper to loosen the retainer from the body and scrape off any adhesive on the vehicle.
^
Be careful not to scratch the body.
^
Use pliers to gently pull the retainer from the body.
2. Clean the bonding surface on the body with a shop towel dampened with 3M General Purpose Adhesive Cleaner or isopropyl alcohol. After cleaning,
keep oil, grease, and water from getting on the bonding surface.
3. Test fit the retainers in their proper mounting position. The paint color should be different where the clip was removed.
4. Prepare the 3M Adhesive:
