Accord V6-3.0L Hybrid (2005)
^
Shift the pocket upward.
^
Insert a 2.5-3.0 mm spacer between the pocket and the passenger's center lower cover.
^
Tighten the screws, and remove the spacer.
5.
Make sure the center pocket lid no longer rubs against the dashboard. If it does, repeat step 4 using a 3.5-4.0 mm spacer.
REPAIR PROCEDURE B: CENTER POCKET
SCREW TIGHTENING/CENTER POCKET
REPLACEMENT
1.
Remove the center pocket assembly:
^
Refer to page 20-132 of the 2003-2007 Accord Service Manual, or
^
Online, enter keyword POCKET, and select
Dash board Center Pocket Removal/Installation from the list.