Accord V6-3.0L Hybrid (2005)
2.
Tighten the center pocket hinge screws and the G-sensor screw.
3.
Check the operation of the center pocket lid:
^
If the lid opens and closes normally, install the center pocket assembly in reverse order of removal, and return the vehicle to the customer.
^
If the lid does not open or close normally, go to step 4.
4.
Install a new center pocket assembly, making sure it has the correctly colored lid:
^
Refer to page 20-132 of the service manual, or
^
Online, enter keyword POCKET and select Dashboard Center Pocket Removal/Installation from the list.
Disclaimer