Accord V6-3.0L Hybrid (2005)
9. Tighten the two bolts (A) securing the harness holder, and install the dipstick (B).
10. Install the three ignition coils to the front cylinder head.
11. Install the intake manifold.
REAR
1. Check the spark plug seals for damage. If any seal is damaged, replace it.
2. Thoroughly clean the head cover gasket and the groove.
3. Install the head cover gasket (A) in the groove of the cylinder head cover (B). Make sure the head cover gasket is seated securely.
4. Remove all of the old liquid gasket from the rocker shaft holder and cylinder head.
5. Clean the head cover contacting surfaces with a shop towel.
6. Apply liquid gasket, P/N 08717-0004, 08718-0001, 08718-0003, or 08718-0009, on the rocker shaft holder mating areas (A).
NOTE: Do not install the parts if 4 minutes or more have elapsed since applying the liquid gasket. Instead, reapply liquid gasket after removing
the old residue.
