Accord V6-3.0L Hybrid (2005)
REPAIR PROCEDURE
1.
Update the PCM PGM-FI software using HDS software version 2.005.008 or later (refer to Service Bulletin 01-023, Updating Control Units
/Modules).
2.
Verify the vehicle is repaired by using the HDS PGM-FI data list to monitor the bank 1ST (short time) fuel trim.
^
If the bank 1ST fuel trim stays consistently below 1.16 (16 percent lean), the vehicle is repaired.
^
If the bank 1ST fuel trim stays equal to or greater than 1.16, then continue with normal troubleshooting.
Disclaimer
