Civic L4-1.8L (2006)
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1.
Remove the original drive belt:
^
Refer to page 4-40 of the 2006-2007 Civic Service Manual, or
^
Online, enter keywords DRIVE BELT, and select Drive Belt Removal/Installation (R18A1 and R18A4 Engine) from the list.
2.
Install the new drive belt, and route it as shown.
NOTE:
Use an appropriate tool for added leverage when setting the wrench on the auto-tensioner. The tensioner is hydraulic and should be moved
slowly to relieve pressure on the belt. Applying excessive force to the tensioner can cause breakage.
Disclaimer