Civic Sedan L4-1590cc 1.6L SOHC (D16A6) MFI (1990)
_mfi/Page-805001.png)
Countershaft: Service and Repair
Reassembly
1. Using a press, install the friction damper (1st gear side) to the countershaft as shown
2. Using a press, install the friction damper (2nd gear side) to the spacer collar.
3. Install the ball bearing using a press as shown.
4. Install the spring washer, tighten the locknut and then stake the locknut tab into the groove.
LOCKNUT
110 -> 0 -> 110 N.m (11.0 -> 0 -> 11 .0 kg-m, 80 ->0 -> 80 lb-ft)
