honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Air Mix Control Motor|Page 4858 > < Air Mix Control Motor Test|Page 4855
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Air Mix Control Motor

Air Mix Control Motor Replacement

1. Remove the under-dash fuse/relay box.

2. Disconnect the 5P connector (A) from the air mix control motor (B). Remove the self-tapping screws and the air mix control motor from the heater

unit. Remove the rod (C) from the arm (D) of the air mix control motor.

3. Install the motor in the reverse order of removal After installation, make sure the motor runs smoothly.

Air Mix Control Motor|Page 4858 > < Air Mix Control Motor Test|Page 4855