CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Fuel Quick-Connect Fittings: Service Precautions
WARNING: Do not smoke while working on the fuel system Keep open flames away from your work area.
The fuel tube/quick-connect fittings assembly connects the in-tank fuel pump with the fuel feed pipe. For removing or installing the fuel pump and fuel
tank, it is necessary to disconnect or connect the quick-connect fittings. Pay attention to following:
-
The fuel tube/quick-connect fittings assembly is not heat-resistant; be careful not to damage it during welding or other heat-generating procedures.
-
The fuel tube/quick-connect fittings assembly is not acid-proof; do not touch it with a shop towel which was used for wiping battery electrolyte.
Replace the fuel tube/quick-connect fittings assembly if it came into contact with electrolyte or something similar.
-
When connecting or disconnecting the fuel tube/quick-connect fittings assembly, be careful not to bend or twist it excessively. Replace it if
damaged.
A disconnected quick-connect fittings can be reconnected, but the retainer on the mating pipe cannot be reused once it has been removed from the pipe.
Replace the retainer when
-
Replacing the fuel pump.
-
Replacing the fuel feed pipe.
-
It has been removed from the pipe.
-
It is damaged.