CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
6. Install the new seat belt tensioner.
CAUTION: Be sure to install the harness wires so that they are not pinched or interfering with other parts.
7. Reconnect the seat belt tensioner 2P connector to side wire harness, then reinstall the two clips.
8. Reinstall the shoulder harness anchor bolt and upper anchor cover.
9. Reconnect the negative battery cable.
10. After installing the SRS unit, confirm proper system operation:
Turn the ignition switch ON (II); the SRS indicator light should come on for about six seconds and then go off.