CR-Z L4-15L Hybrid (2011) Radiator Support Service and Repair Guide
6. Weld the bumper beam bracket (A) and the front side frame (B). Weld the bulkhead lower crossmember (C) to the bulkhead side stay (D) and the
wheelhouse lower member (E). Weld the bulkhead lower crossmember stiffener (F) and the bulkhead side stay.
7. Remove the bulkhead upper center frame, then weld the bulkhead upper side frame (A) to the bulkhead side stay (B) and the bulkhead side stay
plate (C).
8. Drill a hole into the rear portion of the new bulkhead upper side frame (A) for welding it. Weld the bulkhead upper side frame to the wheelhouse
lower extension (B), the wheelhouse upper member (C), and the front damper extension (D).
At (E) portion, plug weld the wheelhouse upper member, the bulkhead upper side frame, and the front damper extension together.
9. Install the bulkhead upper center frame (A) to the bulkhead side stay (B).