Del Sol L4-1.5L SOHC (1993)
Pin Boot Removal
3. Remove pin boot from sleeve A on the caliper bracket.
Removal Of Sleeve B, Pin Boot And Sleeve Boot
4. Remove the pin boot, sleeve B and sleeve boot from the caliper body.
Caliper Piston Removal
5. If necessary, apply compressed air to the caliper fluid inlet to get the piston out. Place a shop rag or wooden block as shown to cushion the piston
when it is expelled. Use low pressure air in short spurts.
WARNING:
^
Do not place your fingers in front of the piston.
^
Do not use high air pressure; use an OSHA approved 30 PSI nozzle.