Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
Brake Pad/Backing Plate
5. Using vernier calipers, measure the thickness of each brake pad lining.
Specs:
Brake Pad Thickness
Standard 10.0 mm (0.39 in)
Service Limit 1.6 mm (0.06 in)
NOTE: Measurement does not include pad backing plate thickness.
6. If the brake pad thickness is less than service limit, replace the front pads as a set.
7. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.