honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Brake Pad|Front|Page 4800 > < Brake Pad|Front|Page 4798
Page 2
background image

Removing Shim, Pads And Retainers

^ Remove the pad shim and brake pads.

INSPECTION

Measuring Thickness Of Brake Pad Lining

^ Using vernier calipers, measure the thickness of each brake pad lining.

Specs

Standard ............................................................................................................................................................................................................   7.5 (0.30 in)

Service Limit  ..............................................................................................................................................................................................  1.6 mm (0.06 in)

Caliper Bolts ..............................................................................................................................................................................................   23 Nm (17 lb.ft.)

^ Remove the pad retainers.
^ Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
^ Check the brake disc for damage and cracks.

INSTALLATION

Brake Pad|Front|Page 4800 > < Brake Pad|Front|Page 4798