Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1436004.png)
16. Move the steering gearbox to the right so the left rack end clears the rear beam.
17. Hold the steering gearbox and slide the rack all the way to the left, place the left rack end below the rear beam.
18. Move the steering gearbox to the left and tilt the left side down to remove it from the car.
INSTALLATION
1. Slide the rack all the way to the right.
2. Pass the right side of the steering gearbox above and through the right side of the rear beam.
3. Raise the left side of the steering gearbox above and through the left side of the rear beam.
4. Hold the steering gearbox and center the rack with its strokes.
5. Install the pinion shaft grommet and insert the pinion shaft up through the bulkhead.
NOTE: Align the tab on the pinion shaft grommet with the slot in the valve body.
