Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1466004.png)
WARNING: The floor jack must be securely positioned or personal injury may result.
12. Tighten the damper pinch bolt.
13. Tighten the damper fork bolt and self-locking nut.
14. Tighten the flange nuts on top of the damper.
15. Install the brake hose mounts with the brake hose mounting bolts.
16. Install the front wheel.
Rear Strut
TOOL REQUIRED
-
Strut Spring Compressor
CAUTION: If the car is raised with a hoist, the center of gravity may change causing the car to tip forward when the damper is removed.
REMOVAL
1. Remove the rear wheels and place them in the trunk for ballast.
2. Remove the rear seat lining.
3. Remove the two flange nuts.
4. Remove the wheel sensor wire bracket.
NOTE: Do not disconnect the wheel sensor connector.
