Odyssey L4-2.2L SOHC (1995)
Fig. 16 Spring Compressor Tool Adjustment
1. Adjust brake spring compressor, Fig. 16.
2. Pack all cavities of needle bearing and coat new cam boot with brake cylinder grease part No. 08733-0.020E, or equivalent rubber grease, then
install3in caliper.
3. Install cam with threaded end facing up. Avoid damaging cam boot since it must be installed first.
4. Install lever, spring washer and parking nut.
5. Tighten parking nut, then install return spring.
6. Install rod into cam, then the new O-ring on sleeve piston.
